Tuesday 24 May 2011
Tuesday 29 March 2011
Tuesday 22 March 2011
History of electronic engineering
Electronic engineering as a profession sprang from technological improvements in the telegraph industry in the late 19th century and the radio and the telephone industries in the early 20th century. People were attracted to radio by the technical fascination it inspired, first in receiving and then in transmitting. Many who went into broadcasting in the 1920s were only 'amateurs' in the period before World War I.[9]
The modern discipline of electronic engineering was to a large extent born out of telephone, radio, and television equipment development and the large amount of electronic systems development during World War II of radar, sonar, communication systems, and advanced munitions and weapon systems. In the interwar years, the subject was known as radio engineering and it was only in the late 1950s that the term electronic engineering started to emerge.[10]
The electronic laboratories (Bell Labs in the United States for instance) created and subsidized by large corporations in the industries of radio, television, and telephone equipment began churning out a series of electronic advances. In 1948, came the transistor and in 1960, the integrated circuit to revolutionize the electronic industry.[11][12] In the UK, the subject of electronic engineering became distinct from electrical engineering as a university degree subject around 1960. Before this time, students of electronics and related subjects like radio and telecommunications had to enroll in the electrical engineering department of the university as no university had departments of electronics. Electrical engineering was the nearest subject with which electronic engineering could be aligned, although the similarities in subjects covered (except mathematics and electromagnetism) lasted only for the first year of the three-year course.
Electronics is often considered to have begun when Lee De Forest invented the vacuum tube in 1907. Within 10 years, his device was used in radio transmitters and receivers as well as systems for long distance telephone calls. In 1912, Edwin H. Armstrong invented the regenerative feedback amplifier and oscillator; he also invented the superheterodyne radio receiver and could be considered the father of modern radio.[16] Vacuum tubes remained the preferred amplifying device for 40 years, until researchers working for William Shockley at Bell Labs invented the transistor in 1947. In the following years, transistors made small portable radios, or transistor radios, possible as well as allowing more powerful mainframe computers to be built. Transistors were smaller and required lower voltages than vacuum tubes to work.
Before the invention of the integrated circuit in 1959, electronic circuits were constructed from discrete components that could be manipulated by hand. These non-integrated circuits consumed much space and power, were prone to failure and were limited in speed although they are still common in simple applications. By contrast, integrated circuits packed a large number — often millions — of tiny electrical components, mainly transistors, into a small chip around the size of a coin.[17]
While some early radios used some type of amplification through electric current or battery, through the mid 1920s the most common type of receiver was the crystal set. In the 1920s, amplifying vacuum tubes revolutionized both radio receivers and transmitters.
Modern televisions and video displays have evolved from bulky electron tube technology to use more compact devices, such as plasma and LCD displays. The trend is for even lower power devices such as the organic light-emitting diode displays, and it is most likely to replace the LCD and plasma technologies.[19]
Although mechanical examples of computers have existed through much of recorded human history, the first electronic computers were developed in the mid-20th century (1940–1945). These were the size of a large room, consuming as much power as several hundred modern personal computers (PCs).[1] Modern computers based on integrated circuits are millions to billions of times more capable than the early machines, and occupy a fraction of the space.[2] Simple computers are small enough to fit into small pocket devices, and can be powered by a small battery. Personal computers in their various forms are icons of the Information Age and are what most people think of as "computers". However, the embedded computers found in many devices from MP3 players to fighter aircraft and from toys to industrial robots are the most numerous.
The ability to store and execute lists of instructions called programs makes computers extremely versatile, distinguishing them from calculators. The Church–Turing thesis is a mathematical statement of this versatility: any computer with a certain minimum capability is, in principle, capable of performing the same tasks that any other computer can perform. Therefore computers ranging from a netbook to a supercomputer are all able to perform the same computational tasks, given enough time and storage capacity.
Many electronics engineers today specialize in the development of programs for microprocessor based electronic systems, known as embedded systems. Due to the detailed knowledge of the hardware that is required for doing this, it is normally done by electronics engineers and not software engineers. Software engineers typically know and use microprocessors only at a conceptual level. Electronics engineers who exclusively carry out the role of programming embedded systems or microprocessors are referred to as "embedded systems engineers", or "firmware engineers".
The modern discipline of electronic engineering was to a large extent born out of telephone, radio, and television equipment development and the large amount of electronic systems development during World War II of radar, sonar, communication systems, and advanced munitions and weapon systems. In the interwar years, the subject was known as radio engineering and it was only in the late 1950s that the term electronic engineering started to emerge.[10]
The electronic laboratories (Bell Labs in the United States for instance) created and subsidized by large corporations in the industries of radio, television, and telephone equipment began churning out a series of electronic advances. In 1948, came the transistor and in 1960, the integrated circuit to revolutionize the electronic industry.[11][12] In the UK, the subject of electronic engineering became distinct from electrical engineering as a university degree subject around 1960. Before this time, students of electronics and related subjects like radio and telecommunications had to enroll in the electrical engineering department of the university as no university had departments of electronics. Electrical engineering was the nearest subject with which electronic engineering could be aligned, although the similarities in subjects covered (except mathematics and electromagnetism) lasted only for the first year of the three-year course.
Early electronics
In 1893, Nikola Tesla made the first public demonstration of radio communication. Addressing the Franklin Institute in Philadelphia and the National Electric Light Association, he described and demonstrated in detail the principles of radio communication.[13] In 1896, Guglielmo Marconi went on to develop a practical and widely used radio system.[14][15] In 1904, John Ambrose Fleming, the first professor of electrical Engineering at University College London, invented the first radio tube, the diode. One year later, in 1906, Robert von Lieben and Lee De Forest independently developed the amplifier tube, called the triode.Electronics is often considered to have begun when Lee De Forest invented the vacuum tube in 1907. Within 10 years, his device was used in radio transmitters and receivers as well as systems for long distance telephone calls. In 1912, Edwin H. Armstrong invented the regenerative feedback amplifier and oscillator; he also invented the superheterodyne radio receiver and could be considered the father of modern radio.[16] Vacuum tubes remained the preferred amplifying device for 40 years, until researchers working for William Shockley at Bell Labs invented the transistor in 1947. In the following years, transistors made small portable radios, or transistor radios, possible as well as allowing more powerful mainframe computers to be built. Transistors were smaller and required lower voltages than vacuum tubes to work.
Before the invention of the integrated circuit in 1959, electronic circuits were constructed from discrete components that could be manipulated by hand. These non-integrated circuits consumed much space and power, were prone to failure and were limited in speed although they are still common in simple applications. By contrast, integrated circuits packed a large number — often millions — of tiny electrical components, mainly transistors, into a small chip around the size of a coin.[17]
Tubes or valves
The vacuum tube detector
The invention of the triode amplifier, generator, and detector made audio communication by radio practical. (Reginald Fessenden's 1906 transmissions used an electro-mechanical alternator.) The first known radio news program was broadcast 31 August 1920 by station 8MK, the unlicensed predecessor of WWJ (AM) in Detroit, Michigan. Regular wireless broadcasts for entertainment commenced in 1922 from the Marconi Research Centre at Writtle near Chelmsford, England.While some early radios used some type of amplification through electric current or battery, through the mid 1920s the most common type of receiver was the crystal set. In the 1920s, amplifying vacuum tubes revolutionized both radio receivers and transmitters.
Television
In 1928 Philo Farnsworth made the first public demonstration of a purely electronic television.[18] During the 1930s several countries began broadcasting, and after World War II it spread to millions of receivers, eventually worldwide. Ever since then, electronics have been fully present in television devices.Modern televisions and video displays have evolved from bulky electron tube technology to use more compact devices, such as plasma and LCD displays. The trend is for even lower power devices such as the organic light-emitting diode displays, and it is most likely to replace the LCD and plasma technologies.[19]
Radar and radio location
During World War II many efforts were expended in the electronic location of enemy targets and aircraft. These included radio beam guidance of bombers, electronic counter measures, early radar systems etc. During this time very little if any effort was expended on consumer electronics developments.[20]Computers
A computer is a programmable machine that receives input, stores and manipulates data, and provides output in a useful format.Although mechanical examples of computers have existed through much of recorded human history, the first electronic computers were developed in the mid-20th century (1940–1945). These were the size of a large room, consuming as much power as several hundred modern personal computers (PCs).[1] Modern computers based on integrated circuits are millions to billions of times more capable than the early machines, and occupy a fraction of the space.[2] Simple computers are small enough to fit into small pocket devices, and can be powered by a small battery. Personal computers in their various forms are icons of the Information Age and are what most people think of as "computers". However, the embedded computers found in many devices from MP3 players to fighter aircraft and from toys to industrial robots are the most numerous.
The ability to store and execute lists of instructions called programs makes computers extremely versatile, distinguishing them from calculators. The Church–Turing thesis is a mathematical statement of this versatility: any computer with a certain minimum capability is, in principle, capable of performing the same tasks that any other computer can perform. Therefore computers ranging from a netbook to a supercomputer are all able to perform the same computational tasks, given enough time and storage capacity.
Microprocessors
In 1969, Ted Hoff conceived the commercial microprocessor at Intel and thus ignited the development of the personal computer. Hoff's invention was part of an order by a Japanese company for a desktop programmable electronic calculator, which Hoff wanted to build as cheaply as possible. The first realization of the microprocessor was the Intel 4004, a 4-bit processor, in 1969, but only in 1973 did the Intel 8080, an 8-bit processor, make the building of the first personal computer, the MITS Altair 8800, possible. The first PC was announced to the general public on the cover of the January 1975 issue of Popular Electronics.Many electronics engineers today specialize in the development of programs for microprocessor based electronic systems, known as embedded systems. Due to the detailed knowledge of the hardware that is required for doing this, it is normally done by electronics engineers and not software engineers. Software engineers typically know and use microprocessors only at a conceptual level. Electronics engineers who exclusively carry out the role of programming embedded systems or microprocessors are referred to as "embedded systems engineers", or "firmware engineers".
Tuesday 24 May 2011
Labels:
phonetics
Tuesday 29 March 2011
Tuesday 22 March 2011
History of electronic engineering
Electronic engineering as a profession sprang from technological improvements in the telegraph industry in the late 19th century and the radio and the telephone industries in the early 20th century. People were attracted to radio by the technical fascination it inspired, first in receiving and then in transmitting. Many who went into broadcasting in the 1920s were only 'amateurs' in the period before World War I.[9]
The modern discipline of electronic engineering was to a large extent born out of telephone, radio, and television equipment development and the large amount of electronic systems development during World War II of radar, sonar, communication systems, and advanced munitions and weapon systems. In the interwar years, the subject was known as radio engineering and it was only in the late 1950s that the term electronic engineering started to emerge.[10]
The electronic laboratories (Bell Labs in the United States for instance) created and subsidized by large corporations in the industries of radio, television, and telephone equipment began churning out a series of electronic advances. In 1948, came the transistor and in 1960, the integrated circuit to revolutionize the electronic industry.[11][12] In the UK, the subject of electronic engineering became distinct from electrical engineering as a university degree subject around 1960. Before this time, students of electronics and related subjects like radio and telecommunications had to enroll in the electrical engineering department of the university as no university had departments of electronics. Electrical engineering was the nearest subject with which electronic engineering could be aligned, although the similarities in subjects covered (except mathematics and electromagnetism) lasted only for the first year of the three-year course.
Electronics is often considered to have begun when Lee De Forest invented the vacuum tube in 1907. Within 10 years, his device was used in radio transmitters and receivers as well as systems for long distance telephone calls. In 1912, Edwin H. Armstrong invented the regenerative feedback amplifier and oscillator; he also invented the superheterodyne radio receiver and could be considered the father of modern radio.[16] Vacuum tubes remained the preferred amplifying device for 40 years, until researchers working for William Shockley at Bell Labs invented the transistor in 1947. In the following years, transistors made small portable radios, or transistor radios, possible as well as allowing more powerful mainframe computers to be built. Transistors were smaller and required lower voltages than vacuum tubes to work.
Before the invention of the integrated circuit in 1959, electronic circuits were constructed from discrete components that could be manipulated by hand. These non-integrated circuits consumed much space and power, were prone to failure and were limited in speed although they are still common in simple applications. By contrast, integrated circuits packed a large number — often millions — of tiny electrical components, mainly transistors, into a small chip around the size of a coin.[17]
While some early radios used some type of amplification through electric current or battery, through the mid 1920s the most common type of receiver was the crystal set. In the 1920s, amplifying vacuum tubes revolutionized both radio receivers and transmitters.
Modern televisions and video displays have evolved from bulky electron tube technology to use more compact devices, such as plasma and LCD displays. The trend is for even lower power devices such as the organic light-emitting diode displays, and it is most likely to replace the LCD and plasma technologies.[19]
Although mechanical examples of computers have existed through much of recorded human history, the first electronic computers were developed in the mid-20th century (1940–1945). These were the size of a large room, consuming as much power as several hundred modern personal computers (PCs).[1] Modern computers based on integrated circuits are millions to billions of times more capable than the early machines, and occupy a fraction of the space.[2] Simple computers are small enough to fit into small pocket devices, and can be powered by a small battery. Personal computers in their various forms are icons of the Information Age and are what most people think of as "computers". However, the embedded computers found in many devices from MP3 players to fighter aircraft and from toys to industrial robots are the most numerous.
The ability to store and execute lists of instructions called programs makes computers extremely versatile, distinguishing them from calculators. The Church–Turing thesis is a mathematical statement of this versatility: any computer with a certain minimum capability is, in principle, capable of performing the same tasks that any other computer can perform. Therefore computers ranging from a netbook to a supercomputer are all able to perform the same computational tasks, given enough time and storage capacity.
Many electronics engineers today specialize in the development of programs for microprocessor based electronic systems, known as embedded systems. Due to the detailed knowledge of the hardware that is required for doing this, it is normally done by electronics engineers and not software engineers. Software engineers typically know and use microprocessors only at a conceptual level. Electronics engineers who exclusively carry out the role of programming embedded systems or microprocessors are referred to as "embedded systems engineers", or "firmware engineers".
The modern discipline of electronic engineering was to a large extent born out of telephone, radio, and television equipment development and the large amount of electronic systems development during World War II of radar, sonar, communication systems, and advanced munitions and weapon systems. In the interwar years, the subject was known as radio engineering and it was only in the late 1950s that the term electronic engineering started to emerge.[10]
The electronic laboratories (Bell Labs in the United States for instance) created and subsidized by large corporations in the industries of radio, television, and telephone equipment began churning out a series of electronic advances. In 1948, came the transistor and in 1960, the integrated circuit to revolutionize the electronic industry.[11][12] In the UK, the subject of electronic engineering became distinct from electrical engineering as a university degree subject around 1960. Before this time, students of electronics and related subjects like radio and telecommunications had to enroll in the electrical engineering department of the university as no university had departments of electronics. Electrical engineering was the nearest subject with which electronic engineering could be aligned, although the similarities in subjects covered (except mathematics and electromagnetism) lasted only for the first year of the three-year course.
Early electronics
In 1893, Nikola Tesla made the first public demonstration of radio communication. Addressing the Franklin Institute in Philadelphia and the National Electric Light Association, he described and demonstrated in detail the principles of radio communication.[13] In 1896, Guglielmo Marconi went on to develop a practical and widely used radio system.[14][15] In 1904, John Ambrose Fleming, the first professor of electrical Engineering at University College London, invented the first radio tube, the diode. One year later, in 1906, Robert von Lieben and Lee De Forest independently developed the amplifier tube, called the triode.Electronics is often considered to have begun when Lee De Forest invented the vacuum tube in 1907. Within 10 years, his device was used in radio transmitters and receivers as well as systems for long distance telephone calls. In 1912, Edwin H. Armstrong invented the regenerative feedback amplifier and oscillator; he also invented the superheterodyne radio receiver and could be considered the father of modern radio.[16] Vacuum tubes remained the preferred amplifying device for 40 years, until researchers working for William Shockley at Bell Labs invented the transistor in 1947. In the following years, transistors made small portable radios, or transistor radios, possible as well as allowing more powerful mainframe computers to be built. Transistors were smaller and required lower voltages than vacuum tubes to work.
Before the invention of the integrated circuit in 1959, electronic circuits were constructed from discrete components that could be manipulated by hand. These non-integrated circuits consumed much space and power, were prone to failure and were limited in speed although they are still common in simple applications. By contrast, integrated circuits packed a large number — often millions — of tiny electrical components, mainly transistors, into a small chip around the size of a coin.[17]
Tubes or valves
The vacuum tube detector
The invention of the triode amplifier, generator, and detector made audio communication by radio practical. (Reginald Fessenden's 1906 transmissions used an electro-mechanical alternator.) The first known radio news program was broadcast 31 August 1920 by station 8MK, the unlicensed predecessor of WWJ (AM) in Detroit, Michigan. Regular wireless broadcasts for entertainment commenced in 1922 from the Marconi Research Centre at Writtle near Chelmsford, England.While some early radios used some type of amplification through electric current or battery, through the mid 1920s the most common type of receiver was the crystal set. In the 1920s, amplifying vacuum tubes revolutionized both radio receivers and transmitters.
Television
In 1928 Philo Farnsworth made the first public demonstration of a purely electronic television.[18] During the 1930s several countries began broadcasting, and after World War II it spread to millions of receivers, eventually worldwide. Ever since then, electronics have been fully present in television devices.Modern televisions and video displays have evolved from bulky electron tube technology to use more compact devices, such as plasma and LCD displays. The trend is for even lower power devices such as the organic light-emitting diode displays, and it is most likely to replace the LCD and plasma technologies.[19]
Radar and radio location
During World War II many efforts were expended in the electronic location of enemy targets and aircraft. These included radio beam guidance of bombers, electronic counter measures, early radar systems etc. During this time very little if any effort was expended on consumer electronics developments.[20]Computers
A computer is a programmable machine that receives input, stores and manipulates data, and provides output in a useful format.Although mechanical examples of computers have existed through much of recorded human history, the first electronic computers were developed in the mid-20th century (1940–1945). These were the size of a large room, consuming as much power as several hundred modern personal computers (PCs).[1] Modern computers based on integrated circuits are millions to billions of times more capable than the early machines, and occupy a fraction of the space.[2] Simple computers are small enough to fit into small pocket devices, and can be powered by a small battery. Personal computers in their various forms are icons of the Information Age and are what most people think of as "computers". However, the embedded computers found in many devices from MP3 players to fighter aircraft and from toys to industrial robots are the most numerous.
The ability to store and execute lists of instructions called programs makes computers extremely versatile, distinguishing them from calculators. The Church–Turing thesis is a mathematical statement of this versatility: any computer with a certain minimum capability is, in principle, capable of performing the same tasks that any other computer can perform. Therefore computers ranging from a netbook to a supercomputer are all able to perform the same computational tasks, given enough time and storage capacity.
Microprocessors
In 1969, Ted Hoff conceived the commercial microprocessor at Intel and thus ignited the development of the personal computer. Hoff's invention was part of an order by a Japanese company for a desktop programmable electronic calculator, which Hoff wanted to build as cheaply as possible. The first realization of the microprocessor was the Intel 4004, a 4-bit processor, in 1969, but only in 1973 did the Intel 8080, an 8-bit processor, make the building of the first personal computer, the MITS Altair 8800, possible. The first PC was announced to the general public on the cover of the January 1975 issue of Popular Electronics.Many electronics engineers today specialize in the development of programs for microprocessor based electronic systems, known as embedded systems. Due to the detailed knowledge of the hardware that is required for doing this, it is normally done by electronics engineers and not software engineers. Software engineers typically know and use microprocessors only at a conceptual level. Electronics engineers who exclusively carry out the role of programming embedded systems or microprocessors are referred to as "embedded systems engineers", or "firmware engineers".
Labels:
History
Subscribe to:
Posts (Atom)
